If you are tired of removing the thermal paste, then you do not need to worry, today we are going to tell you about many such easy ways, with the help of which you can properly remove the thermal paste installed on the processor of your laptop computer.
Let’s see how it is done. You’ll need paper towels, cotton swabs, isopropyl alcohol, and a thermal compound to clean off the thermal paste.
The first thing you need to do is to clean your CPU. If you’re installing a new CPU it shouldn’t matter. But if your CPU has an old compound or you’ve touched the top of it with your fingers or anything like that, it’s a good idea to clean it out.
Make sure you have the paper or towels and cotton swabs used to clean the top of the CPU, but I would recommend using isopropyl alcohol. It usually does a good job getting rid of thermal paste and residue.
Some people like to use alcohol directly but this method is absolutely wrong, if you have made up your mind to clean the cpu with alcohol, then let us also use it once, first of all, a towel or a paper Take it, and try to clean the thermal paste by applying some alcohol on it.
- Learn 3 easy ways to connect a computer keyboard to an Android phone
- How to login Instagram without recovery code
It will take a little more effort but the thermal paste may be cleaned, your little effort may take more because alcohol does not have the properties to clean the grease.
This is only fine for general cleaning, you can clean a greasy material like thermal paste with alcohol, but it can cost you a lot of time.
How to clean thermal paste with isopropyl alcohol
Thermal paste can be cleaned with the help of isopropyl alcohol. Isopropyl alcohol is a liquid that can be used to remove thermal paste-like residue in a matter of seconds.
This reduces the lubricity present in the thermal paste, due to which the thermal paste is cleaned from the top of the processor very thoroughly.
With the help of isopropyl alcohol, you can easily remove the thermal grease on any electronic part and apply a new thermal paste.
The right way to use isopropyl alcohol
Isopropyl alcohol proves to be very useful for cleaning thermal paste, it cleans the thermal paste very well from the top of the processor of the laptop, or computer, which makes the processor look very clean.
To use it, take a small piece of cloth and drop a little isopropyl alcohol on it and rub it on the processor with light hands, this will clean the thermal paste very well.
If it doesn’t clean in one go, take a little isopropyl alcohol and try cleaning it again by dropping it on the cloth, it will 100% clean the thermal paste.
Apart from isopropyl alcohol, you can also clean the thermal paste with the help of dry paper, and a towel.
Thermal paste remover alternative
Thinner:- Used as a substitute for isopropyl alcohol, it reduces lubricity in liquids and acts as a cleaning agent. You can use it to clean the thermals.
Nail polish remover: – You can use nail polish remover to clean thermal paste, it is similar to thinner and it works the same way, if either of the two is available in your house, So you use them, it can clean the thermal paste.
Article related FaQ
We can use thinner and nail polish remover as an alternative to thermal paste remover.
You can use isopropyl alcohol or thinner to remove the thermal paste.
You cannot use water to clean thermal paste. Using water may damage the components.
You can use nail polish remover to remove the thermal paste, but you have to be careful.
4 thoughts on “[Learn] How to Clean Thermal Paste off CPU without Alcohol”
Thanks for this great content.
Superb article! My problem solved.
I like the helpful information you provide
in your articles. I will bookmark your blog and check
again here regularly. I am quite sure I will learn many new stuff
right here! Best of luck for the next!